Nokia 3HE10051AA Compatible 100GBase-SR4 QSFP28 850nm 100m DOM MPO MMF Optical Transceiver Module

Nokia Compatible

MSRP: $238.61
Was: $187.47
Now: $74.99
(You save $163.62 )
SKU:
3HE10051AA-FL
Condition:
New
Availability:
In Stock
Weight:
0.22 LBS
Form Factor:
QSFP28
Rate Category:
100GBase
Interface Type:
SR4
TX Wavelength:
850nm
Reach:
100m
Cable Type:
MMF
Connector:
MPO
DDM:
Yes
Temperature:
COM
TAA:
No
Adding to cart… The item has been added

3HE10051AA-FL Nokia Transceiver Module (100GBase-SR4)

Data Sheet:  HTML   PDF 

The 3HE10051AA-FL is a parallel 100 Gbps Quad Small Form-factor Pluggable (QSFP28) optical module. It provides increased port density and total system cost savings. The QSFP28 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 25 Gbps operation for an aggregate data rate of 100 Gbps on 100 meters of OM4 multi-mode fiber. An optical fiber ribbon cable with an MTP/MPO connector can be plugged into the QSFP28 module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel to channel alignment. The module operates by a single +3.3V power supply. The 3HE10051AA-FL is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP28 Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.

FluxLight's 3HE10051AA-FL is a Nokia® compatible 100GBase-SR4 QSFP28 MPO transceiver and is factory pre-programmed with all the necessary configuration data for seamless network integration. Our transceivers perform identically to Nokia® original transceivers and are 100% compatible with other OEM and third party transceivers. The 3HE10051AA-FL is 100% MSA (Multi-Source Agreement) compliant. All FluxLight's transceivers are tested for 100% functionality and guaranteed compatible for outstanding network performance.

FluxLight offers all brands and form factors of Optical Transceivers for all your networking needs. Now you have a reliable, compatible and affordable means to expand your network while maintaining its integrity.


FluxLight's Full Line of 10GBase-SR Transceivers

Arista QSFP-100G-SR4-A-FL
Arista QSFP-100G-SR4-A-FLT
Brocade-Foundry 100G-QSFP28-SR4-FL
Chelsio SM100G-SR-FL
Ciena 160-9400-900-FL
Cisco QSFP-100G-SR4-FL
Cisco QSFP-100G-SR4-S-FL
Cisco QSFP-100G-SR4-S-FLT
Dell 407-BBWV-FL
Dell 407-BCEX-FL
Extreme 10401-FL
F5  OPT-0031-01-FL
Finisar FTLC9551REPM-FL
Finisar FTLC9552FEPM-FL
Finisar FTLC9554REPM-FL
Fortinet FN-TRAN-QSFP28-SR-FL
HUAWEI QSFP-100G-SR4-Huawei-FL
Juniper JNP-QSFP-100G-SR4-FL
Juniper JNP-QSFP-100G-SR4-FLT
Juniper QSFP-100GBASE-SR4-FL
Juniper QSFP-100GBASE-SR4-FLT
Meraki MA-QSFP-100G-SR4-FLT
Nokia 3HE10051AA-FL
Nokia 3HE10051AA-FLT
Nokia 3HE10551AA-FL
Palo Alto PAN-QSFP28-100GBASE-SR4-FL

Product Quality

Since its inception in 2004, Fluxlight has continually refined its processes to assure the best possible quality for our customers. The foundational elements of these processes are Record-Keeping and Quality Assurance Testing (QAT). To maintain a robust data archive, each part is individually serialized both in its internal EEPROM memory and on its external label. All QAT results and other important information (e.g., manufacture date, compatibility programming) are associated with each Serial Number stored in our cloud-based secure database. QAT consists of visual part inspection as well as verification of all critical parameters and performance of each part. For the 3HE10051AA-FL optical output power and wavelength (850nm) are verified on optical spectrum analyzers. Receiver sensitivity is verified at both minimum distance and the 100m maximum range over actual (not simulated) MMF , multimode fiber cable. Digital Diagnostics Monitoring (DDM) parameters including: optical output power, receive optical power, internal module temperature, transmit bias current and supply voltage, are tested for compliance with specifications. In addition, the part is verified for proper operation across its full operating temperature range, 0C to 50C.

Licensing

The following is a list of Finisar Corporation patents Fluxlight has licensed. This licensure recognizes and compensates Finisar for their intellectual property. The 3HE10051AA-FL, like all Fluxlight optical transceivers, is covered by this license agreement. Therefore, Fluxlight customers can rest assured that all products purchased are fully licensed, and our customers are under no potential liability that may ensue from the use of unlicensed optical transceiver products.

U.S. Patent Numbers: 7,184,668 (System and method of protecting eye safety during operation of a fiber optic transceiver), 7,079,775 (Integrated memory mapped controller circuit for fiber optics transceiver), 6,957,021 (Optical transceiver with memory mapped locations), 7,058,310 (System and method for protecting eye safety during operation of a fiber optic transceiver), 6,952,531 (System and method for protecting eye safety during operation of a fiber optic transceiver), 7,162,160 (System and method for protecting eye safety during operation of a fiber optic transceiver), 7,050,720 (Integrated memory mapped controller circuit for fiber optics transceiver)

Original Equipment Manufacturer (OEM) names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for cross reference/comparative purposes only.

Limited Lifetime Warranty

Fluxlight provides a non-transferable serviceable lifetime warranty to the purchaser of Fluxlight hardware product purchased from Fluxlight or an authorized Fluxlight reseller. Fluxlight warrants to the original end customer of its products specified below that its products are free from defects in material and workmanship affecting form, fit, and function. All such products sold will work in the application specified at the time of purchase and will meet the datasheet specifications as found on Fluxlight’s Web site or otherwise provided by Fluxlight. Any claim alleging that any product fails to conform to the foregoing may be made only by the customer who purchased such product and only while such customer owns such product and while the product remains within the serviceable lifetime period. Fluxlight, at its option, will repair, replace, or provide a credit or refund of either the original purchase price or fair market value, whichever is lower, of any product that is determined by Fluxlight to be defective. Some systems that use Fluxlight products may be allowed to operate outside of the system manufacturer’s published settings and Fluxlight does not cover failure in these circumstances. This warranty covers only defects arising under normal use and do not include malfunctions or failures resulting from misuse, abuse, neglect, alteration, problems with electrical power, usage not in accordance with product instructions, acts of nature, or improper installation or improper operation or repairs made by anyone other than Fluxlight or an Fluxlight authorized third-party service provider. Fluxlight reserves the right to substitute functionally equivalent new or serviceable used parts.

Form more information please see our warranty page.